Care & Maintenance
•
Always place the equipment in a dry environment.
•
Use a warm, damp cloth to keep the product clean.
•
The safety level of the equipment can be maintained only if it is regularly examined for damage and wear, at least
once a week is recommended. This includes any nuts, bolts, moving parts, bushes etc.
•
Ensure that all xings are tight before use.
•
Always replace damaged / worn components with original parts from the manufacturer.
Protect the environment by not disposing of this product with household waste (2002/96/EC).
Check your local authority for recycling advice and facilities (Europe only).
Customer Support
Should you require any assistance regarding this product please gather the following information,
and then contact us using the details below:
1. Serial / batch no. - this can be found on a sticker which
is located on the metal framework of the product.
For future reference, please write down this batch
number in the space provided below.
2. Original purchase date
3. Place of purchase
4. Information about the place
and conditions of use
5. Precise description of the issue/defect
Your Batch/Serial No. is:
Contact Us
ENGLAND
York Barbell (UK) Ltd. York Way, Daventry, Northants, England NN11 4YB
Tel: (01327) 701800 Fax: (01327) 706704 email: helpdesk@yorktness.co.uk
AUSTRALIA
Unit 1, Lot 2, Swaham Road, Minto, N.S.W. 2566 Australia
Tel: (02) 9603 8333 Fax: (02) 9603 8555 email: service@yorktness.com.au
OTHER LOCATIONS
Please see website - www.yorktness.com
5
To Next Page
Loading...
Need help?
General
