10
• SELECTING 2 OR 4 EVENTS PER DAY
These 7 day programmable thermostats have been designed so that you
can select either 2 events (Day or Night ) programming or 4 events
(Morn , Day , Evening , or Night ) programs.
The switch is located inside the thermostat and should be set prior to any
programming. (Switch #1 Off = 4 Events/day, Switch #1 On = 2 Events/day)
• SETTING THE PROGRAM TEMPERATURES
The heating and cooling setpoints can be programmed by pressing the
SET TEMP button.
Press the SET TEMP button; the mode will appear on the display, as well
as the temperature setpoint for that mode.
The number will flash and can be selected by pressing
the or buttons.
Repeatedly pressing the SET TEMP button will allow all of your tempera-
ture settings to be displayed and adjusted.
• SETTING THE TIMED SCHEDULE FOR YOUR PROGRAM
Press and release the PROGRAM button. MO will appear on the display
with the morning symbol ( ) (4 events per day) or the Day ( ) symbol
(2 events per day).
Press the or button to select the day, ie. MO.
NOTE : Press the MODE button to select heat or cool.
Press and release the PROGRAM button to select the start time hour.
Press the or button until the display shows the desired start time hour.
Press and release the PROGRAM button to select the start time minutes.
Press the or button until the display shows the desired start time
minutes. (Program minutes to the 10 minutes interval only, ie. 8:10, 8:20,
8:30, etc.)
• USING THE COPY FUNCTION
The copy function has been designed into the PROGRAM button. For
example, with MONDAY programmed for DAY ( ) and NIGHT ( ), the
final function will show the word COPY on the display. Press the to dis-
play all 7 days of the week, then press PROGRAM to program the Monday
programs to all 7 days of the week. Press the to select individual days
to copy the program to individual days.
• SETTING A S E PA R ATE DAY PROGRAM (ie.
SATURDAY)
Use the or button to advance the day indicator to the day that may
have a separate program. Press the program button to change that day’s
hour and minutes.
NOTE : If the RESUME button is not pressed, the thermostat will automa-
tically start the program schedule within fifteen seconds after the last but-
ton is pressed.
Hold
Program
Set temp
Clock
Resume
Fan
Mode
Outdoor
5 - Programming the thermostat (cont’d)
PRESS
Hold
Program
Set temp
Clock
Resume
Fan
Mode
Outdoor
Hold
Program
Set temp
Clock
Resume
Fan
Mode
Outdoor
• REVIEWING THE SCHEDULED TIMES
To review your programmed schedules, repeatedly press and release the PROGRAM button. Each scheduled event will be dis-
played, starting with the temperature, day, hour and minute for each day of the week. To cancel your review, simply press and relea-
se the RESUME button, or wait 15 seconds for the thermostat to resume automatically.
• REVIEWING THE PROGRAMMED TEMPERATURES
To review your programmed temperatures, repeatedly press the SET TEMPbutton. The display will change to show the Mode, Event
(Day or Night) and the temperature selected.
To Next Page
Loading...
