York DGAA056BDTA - Furnace Specifications; Electrical Specifications

035-16328-002Rev.C(0902)
FURNACE SPECIFICATIONS
DGAA -- AUTOMATIC IGNITION -- WITH BUILT-IN COIL CABINET -- 4 TON - AIC READY
MODEL NO, Factor'/Equipped for use with Input/BTUH OutputJBTUH
DGAA056BDTA NATURAL GAS 56,000 45,000
DGAA07OBDTA NATURAL GAS 70,000 56,000
DGAAO77BDTA NATURAL GAS 77,000 62,000
DGAAO9OBDTA NATURAL GAS 90,000 72,000
DGPA -- STANDING PILOT -- WITH BUILT-IN COIL CABINET -- 3 TON - AIC READY
DGPA056ABTA NATURAL GAS 56,000 45,000
DGPA070ABTA NATURAL GAS 70,000 56,000
DGPA077ABTA NATURAL GAS 77,000 62,000
DGPA090ABTA NATURAL GAS 90,000 72,000
DGPH -- STANDING PILOT -- WITH BUILT-IN COIL CABINET -- 3 TON - NO AIC CONTROLS
DGPHO56ABTA NATURALGAS 56,000 45,000
DGPHO70ABTA NATURALGAS 79,000 66,000
DGPH077ABTA NATURALGAS 77,005 62,000
DGPH09OABTA NATURALGAS 90,000 72,000
DGAH056BBSA
DGAHO77BBSA
DGAH -- AUTOMATIC IGNITION -- HEATING ONLY -- NO COIL CABINET
I NATURALGASI 66,090I 45,006
NATURAL GAS 77,000 62,000
Electdcal Power Supply
Breaker or Fuse
Thermostat Circuit
Nominal Anticipator Setting
Gas Valve Inlet
ELECTRICAL SPECIFICATIONS
115 Volts - 60 Hz - 1 Phase
15 Arnp
24 Volt - 60 Hz - 40 VA
.50
1/2" NFPT
24-314"
19.1/2 °
24-314"
19-1/2"
5g=1/2"
76"
DGAHSeries
FIGURE 1 : Furnace Dimensions
DGPH, DGPA & DGAA Series
2 Unitary Products Group