York HA090 - Page 80

036-21323-002-C-0206
8 Unitary Products Group
TABLE 6: OUTDOOR UNIT PHYSICAL DATA
Description
Unit Model
H B 180 H B 240
Compressor
1
Rating - (Qty) Tons 2 X 7.5 = 15 Tons 2 X 10 = 20 Tons
Fans
Quantity 2 2
Diameter - inches 24 24
Blades/Pitch ( ) 3/34 3/32
Nominal CFM 12,400 11,400
Fan Motors
2
HP 1 1.5
RPM 1140 1100
Coil
Rows Deep X Rows High 2 X 30 2 X 30
Finned Length - inches each slab 60 78
Face Area - square feet (both slabs) 25 32.5
Tube(Copper) OD - inches 3/8 3/8
Fins(Aluminum) per inch 16 16
Refrigerant - 22 (lbs -oz.)
Holding Charge (sys1/sys2)
3
1 - 0 / 1 - 0 lbs. 1 - 0 / 1 - 0 lbs.
Operating Charge (sys1/sys2)
4
14.0/14.0 lbs. 17.0/17.0 lbs.
Unit Weight (lbs)
Shipping 944 1380
Operating 957 1396
1. These compressors are fully hermetic.
2. The ball bearing, 56 frame, single phase condenser fan motors have internal protection and are directly connected to the condenser fans. Motor
rotation is counterclockwise when viewing the lead end, which is opposite the shaft end.
3. The amount of charge in the unit as shipped from the factory.
4. Total operating charge for the condensing unit, matching indoor unit, and 25 feet of interconnecting pipe.
TABLE 7: INDOOR UNIT PHYSICAL DATA
Description
Unit Model
L B 180 L B 240
Coil
Rows Deep X Rows High 3 X 32 3 X 40
Finned length- Inches 83 81
Face Area - Square Feet 18.4 22.5
Tube (Copper) OD - Inches 3/8 3/8
Fins (Aluminum) per Inch 13 16
Centrifugal Blower
(Forward Curve - Qty)
Diameter X Width - Inches 15 X 12 - 2 18 X 18 - 2
Blower Motor
1
HP Field Installed
RPM -- --
Filters
(Throwaway)
Quantity Per Unit 4/4 10
Size - Inches 20 X 21 X 2 & 22 X 24 X 2 20 X 25 X2
Total Face Area - Square Feet 25.8 34.7
Unit Weight (lbs)
Shipping 720 990
Operating 830 1115
Accessory Operating
Weight (lbs)
Motor & Drive
3HP 47 --
5HP 120 120
Supply Air Plenum 185 N/A
Return Air Grille 25 N/A
Base 140 210
1. Refer to Table 23 and 25 for more information.
http://www.rezine.ne
t
Page 80