UNIT DIMENSIONS
- (BHN - 7-1/2 & 10 TON) (Cont’d.)
DUCT COVERS - Units are shipped with all air duct
openings covered.
For
side duct applications;
1.Remove and discard the supply and return air duct
covers.
2.Connect ductwork to duct flanges on the rear of the
unit.
For
bottom duct applications;
1. Remove the side supply and return air duct covers
to gain access to the bottom supply and return air
duct covers.
2. Remove and discard the bottom duct covers.
3. Replace the side duct covers.
DETAIL “X”
SIDE SUPPLY AND RETURN AIR DUCT OPENINGS
CENTER OF GRAVITY
BAROMETRIC RELIEF RAIN HOOD
REAR VIEW L.H. END VIEW
23-3/8" 2"
3-3/4"
A
27"
3/4" CONDENSATE
DRAIN
(M UST BE TRAPPED)
7"
(B) POW ER W IRING
E N T R Y
29-5/8"
3-1/2"
4-1/2"
71"
E C O N O M IZ E R R A IN H O O D
DIM
"A "
28
31
31
24
ECONOMIZER
MOTORIZED DAM PER
M ANUAL DAM PER 0-100%
M ANUAL DAM PER 0-35%
DETAIL “Y”
UNIT WITH ECONOMIZER AND FIXED OUTDOOR AIR HOODS
DIM. 7-1/2 TON 10 TON
A 32" 32-1/2"
B 44-3/4" 44"
511.17-TG2Y
Unitary Products Group 11
To Next Page
Loading...
