JOHNSON CONTROLS
49
SECTION 2 – OPTIVIEW CONTROL CENTER
FORM 160.69-O1
ISSUE DATE: 9/30/2012
2
Programmable
Enter Reference
Service Technicians refer to YORK Service Manual
160.69-M1 for an explanation of this setpoint.
Start Calibration
This option is hidden after calibration has started.
Service Technicians refer to YORK Service Manual
160.69-M1 for an explanation of this setpoint.
Cancel Calibration
This option only becomes available after calibration
has started. Service Technicians refer to YORK Service
Manual 160.69-M1 for an explanation of this setpoint.
Accept Calibration
This option only becomes available after the calibra-
tion sequence is complete. Service Technicians refer to
YORK Service Manual 160.69-M1 for an explanation
of this setpoint.
Fault Acknowledge
This option is only displayed if a fault is present. Al-
lows clearing of High Speed Thrust Bearing related
shutdowns. Service Technicians refer to YORK Ser-
vice Manual 160.69-M1 for a more detailed explana-
tion.
Navigation
Home
Causes an instant return to the Home Screen.
Compressor
Return to the Compressor Screen.
To Next Page
Loading...
