Need help?Do you have a question about the York YS and is the answer not in the manual?
Details how matched components optimize system efficiency for better performance.
Details the 10.4-inch color LCD, soft keys, and graphical display for chiller operation.
Lists parameters displayed on the HOME and SYSTEM screens for monitoring chiller operation.
Details control and monitoring for the evaporator side of the chiller.
Covers setpoints and monitoring for the condenser side of the chiller.
Provides information and control for the compressor, including slide valve.
Covers starter status, setpoint programming, and general system setup parameters.
Explains trending capabilities and how system messages are displayed and color-coded.
Lists various warning, routine, cycling, and safety shutdown messages for diagnostics.
Technical specifications for the rotary screw compressor and oil separator design.
Details evaporator and condenser shells, tubes, water boxes, and refrigerant flow control.
Features and benefits of the Solid State Starter and BAS communication interface.
Covers motor voltage variations, starter types, and power supply requirements.
Details power factor correction, wire sizing, and motor electrical data calculations.
Defines unit capacity, operating conditions, power, and compressor specifications.
Details the slide valve capacity control and the compressor lubrication system.
Covers motor coupling, evaporator, and condenser construction and specifications.
Explains refrigerant metering, isolation, and the basic functions of the control center.
Details system status messages, safety, and cycling shutdown information.
Covers trending, data output, BAS interface, and compressor starter options.
To Next Page
General
