19JOHNSON CONTROLS
FORM 160.80-EG1 (808)
STARTER – FIELD INSTALLED
A eld installed, electro-mechanical compressor motor
starter is available, selected for proper size and type for
job requirements and in accordance with Johnson Controls
Engineering Standard R-1079 for Starters.
MARINE WATER BOXES
Marine water boxes allow service access for cleaning of
the heat exchanger tubes without the need to break the
water piping. Bolted-on covers are arranged for conve-
nient access. ANSI/AWWA C-606 nozzle connections are
standard; anges are optional. Marine water boxes are
available for condenser and/or evaporator.
KNOCK-DOWN SHIPMENT
The chiller can be shipped knocked-down into major
assemblies (evaporator, condenser, driveline, etc.) as
required to rig into tight spaces. This is particularly conve-
nient for existing buildings where equipment room access
does not allow rigging a factory packaged chiller.
REFRIGERANT STORAGE/RECYCLING SYSTEM
A refrigerant storage/recycling system is a self-contained
package consisting of a refrigerant compressor with oil
separator, storage receiver, water-cooled condenser, lter
drier and necessary valves and hoses to remove, replace
and distill refrigerant. All necessary controls and safety
devices are a permanent part of the system. Typically not
required if unit isolation valves are provided.
To Next Page
Loading...
