JOHNSON CONTROLS
88
FORM 160.69-O1
ISSUE DATE: 9/30/2012
SECTION 2 – OPTIVIEW CONTROL CENTER
Current Limit Setpoint.
Chiller Pulldown Demand Limit
Access Level Required: OPERATOR
Allows the user to specify the maximum allowed Chill-
er Current during the Chiller Pulldown Period. The
Chiller Pulldown Period is in effect from the instant the
chiller enters “System Run” until the Leaving Chilled
liquid temperature is within 2º F of the Leaving Chilled
Liquid Temperature Setpoint. Refer to the Electro-me-
chanical Starter Screen for a detailed explanation of the
Chiller Pulldown Demand Current Setpoint.
Print
Access Level Required: VIEW
Generates Setpoints print report.
Navigation
Home
Access Level Required: VIEW
Causes an instant return to the Home Screen.
Setup
Access Level Required: VIEW
Moves to the sub-screen allowing setup of general sys-
tem parameters.
To Next Page
Loading...
