111
JOHNSON CONTROLS
FORM 150.72-NM3 (1020)
ISSUE DATE 10/05/2020
SECTION 5 – TECHNICAL DATA
55
YLAA0195HE
DIMENSIONS (ENGLISH)
NOTE:
Placement on a level surface of free of obstructions
(including snow, for winter operation) or air circulation
ensures rated performance, reliable operation, and ease
of maintenance. Site restrictions may compromise
minimum clearances indicated below, resulting in
unpredictable airow patterns and possible diminished
performance. Johnson Controls’s unit controls will
optimize operation without nuisance high-pressure
2398
2242
822
2251
1082
473
2159
381
2911
safety cutouts; however, the system designer must
consider potential performance degradation. Access to
the unit control center assumes the unit is no higher than
on spring isolators. Recommended minimum clearances:
Side to wall – 6'; rear to wall – 6'; control panel to end
wall – 4'0''; top – no obstructions allowed; distance
between adjacent units – 10'. No more than one adjacent
wall may be higher than the unit.
FIG. 41 – DIMENSIONS (ENGLISH) YLAA0195HE
To Next Page
Loading...
