EasyManua.ls Logo

York YMPA 0160 - Technical Data - Clearances

York YMPA 0160
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
75JOHNSON CONTROLS
FORM NO.: 6U6K-B01E-NB-EN
SECTION 5 – TECHNICAL DATA
FIGURE 40 – INSTALLATION CLEARANCES
TECHNICAL DATA – CLEARANCES
YMAA/YMPA0080-0130 (WITHOUT HYDRO KIT)
Notes
1.The gure above uses 130 kW unit as an example but also applies to all models;
2.No obstructions allowed above the unit;
3.Only one adjacent wall may be higher than the unit.
The condenser fans are propeller-type and are not recommended for use with ductwork, lters or other impediments to airow in the
condenser air stream. If the unit is restrained for indoor application, induced fans must be installed except for ductwork to prevent air
ow decrease.
Cooke Industries - Phone: +64 9 579 2185 Email: sales@cookeindustries.co.nz Web: www.cookeindustries.co.nz

Table of Contents

Related product manuals