York YZF024THRU 060*C - Heating Performance with High Efficiency Furnaces

To Next Page

To Previous Page

Johnson Controls Unitary Products 9

632151-YTG-A-1010

CP equals MBH output divided by (total KW input x 3.412).

HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the

total electric power input during the same period.

— = Not Applicable.

HEATING CAPACITY - With Air Handler Coils

UNIT MODEL

AIR HANDLER

MODEL

COIL

MODEL

ARI HEATING

STAGE

RATED

CFM

NET MBH

HSPF COP @ 47

47 OD 17 OD

1 PH HP WITH MV - VARIABLE SPEED

YZF06013C

MV20D FC/MC62D

1 1075 41.5 – – 3.42

2 1630 58.0 38.0 9.00 3.72

2 1075 57.5 38.5 9.00 3.24

MV20D FC64D

1 1075 42.0 – – 3.52

2 1630 58.0 38.0 9.00 3.82

2 1075 58.0 38.5 9.00 3.32

1 PH HP WITH AHP/ SHP / AHX / F*FP

YZF06013C AHX60 –

1 1255 42.5 – – 3.56

2 1930 58.0 38.5 9.00 3.80

2 1255 58.0 38.5 9.00 3.40

Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ARI Standards 210.

Cooling MBH based on 8°F entering air temperature, 50% RH, and rated air flow.

EER (Energy Efficiency Ratio) is the total cooling output in BTU’s at 95°F outdoor ambient divided by the total electric power in watt-hours at those conditions.

SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTU’s during a normal annual usage period for cooling divided by the total electric power

input in watt-hours during the same period.

1. Rated CFM same as for cooling.

2. Heating MBH based on ARI standards of 70° DB entering indoor air, 72% RH outdoor air with 25 feet of interconnecting piping and no

supplemental electric heat operation.

HEATING CAPACITY - With High Efficiency Motor Furnaces

MODEL

FURNACE

MODEL

COIL

MODEL

ARI HEATING

RATED