-11-
3 Using the Car Dash Cam
3.1 Recording Videos
With an SD card inserted and the device connected to power, when the car en-
gine is switched on the dash cam will automatically power on and start recor-
ding. When the vehicle engine is switched off, the dash cam will automatically
save the recording and power off after the time set in Device Off setting.
Alternatively, tap the Play/Pause icon (G) on the right-hand side of the Shortcuts
to stop/start video recording manually.
3.2 Mode
Instantly optimize the T3 car dash cam by selecting one of four video recor-
ding modes. Selecting a mode automatically optimizes four settings with preset
values designed to best suit your environment, saving you time having to cust-
omize each inside the Setup menu.
To change modes, tap anywhere on the Home Screen to reveal the Shortcuts.
Select the Modes icon (A) on the left-hand side. From here, switch between:
Everyday Driving Scenic Driving
Medium
3 mins
On
1 min
Low
5 mins
On
Off
High
1 min
On
1 min
N/A
N/A
N/A
N/A
Monitoring a
Parked Vehicle
HDR Driving
Optimizes
recording
settings
for regular use
Records longer
video clips for
easier post
processing
Increases
G-Sensor
sensitivity and
optimizes battery
efficiency
Optimizes low
light image
quality and
minimizes
screen glare
DRIVE SCENIC PARK HDR
Loop Recording
Collision
Best for ...
Overview
Parking Mode
LCD Off
To Next Page
Loading...
Need help?
General
