Z-EDGE T3 - 3.15 Managing Video & Photo Files; 3.16 Reset

-16-
Note:
Compatible with Windows (XP and later) and Mac (OSX and later).
3.16 Reset
In the event of a software crash, locate the reset button (5) on the device. Long
press (5) the power button for seven seconds, then the device will be reset.
Note:
Press reset button only when the device crashes. Under normal circumstances,
please do not press the reset button.
3.15 Managing Video & Photo Files
Connecting to a computer
Connect the device to a computer using the micro USB cable. The dash cam will
automatically power on and a USB icon will be displayed on the display screen.
The contents of the memory card will appear as a regular disk drive on your
computer as if it were a USB flash drive. Browse as normal to view, play, copy and
delete saved files.Recorded videos and photo files are classified and grouped into
different folders:
• EVENT: Emergency videos automatically protected by Collision detection,
Parking mode or manually.
• Z-EdgeDVC: Normal videos.
• PHOTO: Saved snapshots.
Recorded video and photo files are saved using the following naming rules:
• Date + time + index