Z-EDGE Z3D - Z-EDGE Z3 D Dash Cam Deleting Video and Photo Files; Z-EDGE Z3 D Dash Cam Managing Video and Photo Files

Note:
• F means front-view file, R means rear-view file.
4. Press the 'Up' and 'Down' buttons (4&5) to choose the file to preview and
'OK
' button (6) to select.
5. Press the 'Menu
' button (3) to return / pause the preview.
6. Press the 'Menu
' button (3) again to return to the Playback menu.
3.25 Deleting Video & Photo Files
1. Go to the Playback menu (see 3.24).
2. Navigate to the file you wish to manage and press the 'OK
' button (6) to select.
3. Press the 'OK
' button (6) to delete the file.
4. Press the 'Up
' and 'Down' buttons (4&5) to select between Yes and No.
5. Use the 'OK
' button (6) to confirm your choice.
6. Press the 'Menu
' button (3) to return to the Playback menu.
3.26 Managing Video & Photo Files
Connecting to Computer
Connect the dash cam to a computer using the included shorter Micro-USB
data cable. The dash cam will automatically power on and a USB icon will be
displayed on the dash cam screen.
The contents of the Micro SD card will appear as a regular disk drive on your
computer as if it were a USB flash drive. Browse as normal to view, play, copy
and delete saved files.
Recorded videos and photo files are sorted into different folders:
• Z-EDGE Z3D > Event: Emergency videos automatically protected by Collision
detection, Parking Mode or manually.
• Z-EDGE Z3D > Normal: Normal videos.
• Z-EDGE Z3D > Photo: Snapshots.
Recorded video and photo files are saved using the following naming rules:
• Date + Time + Index + F / R
-17-