Z-Wave CT100 User Manual

PG 6
PG 7
Chirp set - Touch this to turn the audible chirp sound on or off.
F
C
Set - Touch this to switch the temperature display scale from
o
F to
o
C .
FILTER - AIR FILTER ALERT - The CT100 can be programmed to remind you when the HVAC
sytem’s air lter needs changing.
Touch FILTER. The display will show the usage to date.
Touch FILTER for over 3 seconds and the display will change to LIMIT.
Touch arrows to set desired usage limit before lter alert comes on home screen.
When this limit is reached, FILTER will be on home screen and the CHECK FILTER indicator lights.
Limit may be set from 0 to 999 days/99 weeks; default is 90 days/12 weeks. Touch to reset.
To reset the usage back to 0, touch usage number; touching it again restores the displayed usage.
Touch to return to the MENU screen.
LOCK (The CT100 has 2 lock modes)
Touch icon for 5 seconds; the unit will go into the PARTIAL lock mode. The user can temporarily
override the CT100 target with the +/- buttons only. (1 bar)

Z-Wave CT100 Specifications

General

Brand	Z-Wave
Model	CT100
Category	Thermostat
Language	English