EN.
48
Values (data type is 1 byte dec):
• default value 30 = 3s
• 0 = time is set automatically
• 3 - 50 = 0.3seconds - 5seconds (100ms resolution)
Parameter no. 90 – Time delay for next motor movement
This parameter defines the minimum time duration between successive motor movements
(minimum time after which the motor is switched off and on again).
Values (data type is 1 byte dec):
• default value 5 = 500ms
• 1 - 30 = 0.1seconds - 3seconds (100ms resolution)
To Next Page
Loading...