Bass EQ Control
In vehicle sound systems they have a tendency to peak at about
100Hz to 120Hz and to roll off after that. This leaves a hole in the bass
response in the 40Hz to 50Hz range.
To compensate for this effect, ZAPCO has provided all Reference
Series amplifiers with a variable Bass equalization circuit. Each amplifier
has a “Bass Boost” control, which allows adjustment of the bass from 0dB to
as much as 18dB. This adjustment is made at a frequency of 44Hz.
Use the Bass EQ with caution. Too much equalization can easily
cause amplifier clipping and may even damage your speakers.
Bass Equalization Curves
To Next Page
Loading...
Need help?
General