Page 22
6) AUX FUNCTION #1
On the Combi hour-meter is immediately over-written by that of MDI
instrument.
Off In this configuration the alarm "AL98" will be displayed on the MDI
for 1 minute. If during this minute the user doesn't set ON the "Aux
function #1", the MDI hour-meter will be over-written by that of the
controller.
7) CHECK UP ENABLE
On This function sets an alarm (AL99, Check Up Needed) after 300
hours which informs the operator that it is necessary to make
assistance service on the machine.
Off This function is disabled.
8) CHECK UP DONE
On This option enables to reset the check-up hour-meter and the alarm
"Check Up Needed".
Off This function is disabled.
To Next Page
Loading...
