Page 21
4.4 "TESTER" MENU
The most important input or output signals can be measured in real time using the
TESTER function of the console. The Console acts as a multimeter able to read
voltage, current and temperature.
4.5 "ADJUSTMENT" MENU
1) ADJUST BATTERY = Battery voltage reading adjustment according with the real
battery voltage.
2) ADJUSTEMENT #01 = Sets the maximum value of the battery discarge curve.
3) ADJUSTEMENT #02 = Sets the minimum value of the battery discarge curve.
4.6 "SET OPTION" MENU
1) HOUR COUNTER
Keyon hourmeter always updated.
Running hourmeter updated only if traction, lifting or hydraulics functions are
activated.
2) BATTERY CHECK
On the battery discarge level check is carried on; when the battery level
reaches 10%, an alarm is signaled and the maximum current is
reduced to the half of the programmed value.
Off the battery discarge level check is carried on but no alarm is
signaled.
3) AUX FUNCTION 2
Present Proportional electrovalve present.
Absent Proportional electrovalve not present. Will be driven like an On/Off
electrovalve.
4) QUICK INVERSION
Belly the truck goes backward direction (at 50% of maximum speed) till the
belly button is pressed.
Timed the truck goes backward direction (at 50% of maximum speed) only
for some seconds.
5) SHIFT FUNCTION
Present The Shift function is enabled.
Absent The Shift function is not used. In this case the output for the shift left
valve can be used to drive an external horn. The Combi buzzer will
be driven in parallel with the horn.
To Next Page
Loading...
