Page 16
A20 ENCODER Incremental ENCODER connector (see chapter 3.6).
A21 ENCODER Incremental ENCODER connector (see chapter 3.6).
A22 ENCODER Incremental ENCODER connector (see chapter 3.6).
A23 ENCODER Incremental ENCODER connector (see chapter 3.6).
A24 MODE This input allows the customer to select the software for traction or
lifting application.
Configuration:
MODE: Open (not connected) Traction inverter
MODE: Close (connected with A5) Pump inverter
A25 SAFETY If not connected to -Batt the MC coil power output will be disabled.
Can also be used as a general purpose input.
A26 3rd SPEED Input for third speed request; it is active HIGH.
A27 DIG. IN. This is a digital input, free for customer request.
A28 2nd SPEED Input for second speed request; it is active HIGH.
A29 4th SPEED Input for fourth speed request; it is active HIGH.
To Next Page
Loading...
Need help?
General
