Zaxcom Nova Connector Pin Assignments
48
Nova Connector Assignments
Audio Input / Output Connectors (XLR-3)
Pin 1 - Ground
Pin 2 - Signal (+)
Pin 3 - Signal (-)
Audio Output Connectors (TA-5)
Pin 1 - Ground
Pin 2 - Channel A (Left) ( + )
Pin 3 - Channel A (Left) ( - )
Pin 4 - Channel B (Right) ( + )
Pin 5 - Channel B (Right) ( - )
Slate Microphone Input Connector (1/8” TRS)
This is a balanced input and can be used with dynamic microphones. It can also be used unbalanced with low
voltage microphones.
Tip - ( + ) / Hot – Biased to 5 Volts
Ring - ( - ) / Cold – Biased to 5 Volts
Sleeve - Ground
Headphone Output Connectors (1/4” TRS)
Tip - Signal Left
Ring - Signal Right
Sleeve - Signal ground
Power Connectors (Hirose-4 Connector)
Pin 1 - Ground ( - )
Pin 2 - Not Connected
Pin 3 - Not Connected
Pin 4 - DC ( + )
To Next Page
Loading...