Zaxcom NOVA - Nova Technical Specifications; Analog and Digital I;O Specs; RF Interface and Receiver Specs

Zaxcom Nova Specifications
52
Nova Specifications
Analog In
Inputs: 4 Mic/line-level with 48V phantom power and 2 line-level
Connector: 4 x XLR-3F
Mic level input range: -56 to -26 dBu
Line level input range: -10 to +8 dB
Distortion: 0.0015%
ADC bit-depth: 24 bits
Dual ADC input dynamic range: 140 dB with NeverClip™
Clipping level: +28 dBu
Frequency response: 28 Hz to 22 kHz (48 kHz sampling-rate)
THD + noise: 0.0015%
Analog Out
4 Balanced TA5 (6 bus) - 0dBu, -10dBu and -35dBu
Headphone: 1/4 inch stereo bus
Output level: 0 dBu @ -20 dBFS
Output clipping level: +20 dBu
DAC Bit-depth: 24 Bits
DAC Dynamic Range: 115dB
Impedance: 30 ohm
Digital In / Out
AES / AES42 In: 2 Pair (4 Channels)
AES Out: 3 Pair (6 Busses)
Connector: DB-15 mini (DE-15)
AES Sample rate conversion: 32-96 KHz
ZaxNet RF Interface
2.4 GHz Transmitter: 50mW output power
Frequency Range: 2.403 to 2.475 GHz
Modulation Type: Spread Spectrum
Bandwidth: 1MHz
Connector: SMA female
Receiver
QRX212 Receiver module slots: 2
RF Connectors: 2 SMA
RF Impedance: 50 ohm
RF Amp Noise Figure: .5 dB
RF Amp IP3: +30 dB input
RF Filter Band Pass: 35 MHz
RF Tuning Range: 512 - 698 MHz
QRX212 Module
Receivers Channels per Module: 2
Receiver Modulation: Zaxcom Proprietary Digital
Tuning Range: 512 - 698 MHz
Power Consumption: 200 ma @ 12 VDC
Size: 5" x 3" x .8" (L x W x H)