FOREWORD
This manual provides maintenance, diagnosis, service and repair information for the 2746e printer
models manufactured by Zebra Technologies Corporation, Camarillo, California.
TECHNICAL SUPPORT
If for any reason you require product technical support, please contact the Distributor where you first
purchased your equipment. If they cannot help you or at their direction, contact Zebra Repair
Administration.
COPYRIGHT NOTICE
This document contains information proprietary to Zebra Technologies Corporation. This document
and the information contained within is copyrighted by Zebra Technologies Corporation and may
not be duplicated in full or in part by any person without written approval from Zebra. While every
effort has been made to keep the information contained within current and accurate as of the date of
publication, no guarantee is given or implied that the document is error-free or that it is accurate
with regard to any specification. Zebra reserves the right to make changes, for the purpose of
product improvement, at any time.
TRADEMARKS
2746e is service marks and Zebra Technologies is a trademark of Zebra Technologies Corporation.
Windows and MS-DOS are registered trademarks of Microsoft Corp. All other marks are trademarks
or registered trademarks of their respective holders.
OPERATOR CAUTIONS AND WARNINGS
These pages describe general safety and maintenance procedures that an operator must follow.
They are referenced throughout the service manual. The manual may include other warnings and
cautions not displayed here.
ii 980428-001 Rev. A
To Next Page
Loading...
Need help?
General
