Models
Many of the earlier model Zebra printers are similar in appearance to the Zebra 2746e thermal
printer. The printer features that identify the 2746e printer from similar Zebra printers are:
Print Odometer
Printer Color - Light Grey and teal (bluish green) control button on the front panel
Flash Programmed Printer Memory - No Memory Cartridge (see the rear panel of printer)
Carbon Fiber (Black) 1 inch (inner diameter) Media Roll Holder
Label Dispense (Peel) and Batch Mode Switch (see the rear panel of printer)
A High Tension Label Dispense (Peel) Mechanism
Head-Up Sensor (small sensor slot in the center panel)
300 Watt Power Supply
Expanded Language Support (14 MS DOS™ and 7 Windows™ code pages)
Industry Standard Bar Code including PDF417 and Maxicode two dimensional bar codes
Optional Cutter
Optional Real Time Clock (RTC) with a ten year battery life
2 980428-001 Rev. A
2746e
Thermal transfer thermal printer has ribbon tubes
above the printhead mechanism and can print in
Direct Thermal and Thermal Transfer print
modes.
To Next Page
Loading...
Need help?
General
