Label Dispense
Mode - Step 8
Change the printer mode switch to “Peel”.
Press the CANCEL button to initiate Label Dis
-
pense Mode to peel labels.
Step 9 With the media access door open, swing the la-
bel taken sensor gate up to be in the active sens-
ing position, as shown below. A screw releases
and secures the sensor gate to the upper front
cover, locking it in place. Always lock the gate.
Installation & Operation
22 980412-001 Rev.A
PEEL
BATCH
CANCEL
Switch to Peel Mode
Press CANCEL
Remove Slack (FEED)
Set Label Taken
Sensor to Active
Position
To Next Page
Loading...
