Label Dispense
Mode - Step 10
Close the media access door.
The media access door must be closed for the
label taken sensor to detect labels for the label
dispensing (peel mode) to work.
Press the FEED button until the first label is pre-
sented (peeled).
Step 11 Remove the label. The printer is ready to dis-
pense labels.
980412-001 Rev.A 23
Installation & Operation
S
T
E
P
P
E
R
M
O
T
O
R
Label Presented,
Remove Label
(Media Path Shown)
Present Label (FEED)
Close Printer
Press FEED
To Next Page
Loading...
