Packing Materials Replacement 980358-400A
To ship or store the printer, make sure all components are packed as shown.
Move the printer carefully. While the printer has sturdy construction, mechanical damage
can certainly result from falls or rough handling.
24 980358-001 Rev. B
1 Foam set
2 Master carton all-in-one
3 Poly-bag
4 Ship kit (varies per printer)
Extreme temperature and humidity
fluctuations or mishandling can damage the
printer and power supply.
When unpacking the printer, allow 30 minutes
or more before opening the plastic bag. This
time allows the printer to stabilize temperature
especially after storage in a cool, dry location
and then placement in a warmer, more humid
location. Warm, humid air condenses on the
cool components of the printer and this
condensation may damage the components.
To Next Page
Loading...
Need help?
General
