P14-66 Mobile Printer CPCLProgramming Manual
wlan.bssid
type: getvar
Returns the MAC address of the access point with which
the printer is associated. This value is only relevant
when “wlan.associated” returns “yes”.
getvar result MAC address of access point
Example Description Get the MAC address of the AP
Syntax ! U1 getvar “wlan.bssid”
Result “00:d0:f2:57:13:3d”
wlan.current_essid
type: getvar
This parameter refers to the eSSID of the network cur-
rently associated with the printer. The eSSID is returned
only if the printer is associated with an access point.
getvar result This will return the eSSID that the printer is asso-
ciated with in Infrastructure mode. When the
printer is in Ad Hoc mode it will return the stored
eSSID. (For more information on Infrastructure
and Ad Hoc modes see wlan.operating_mode.)
Example Description This command instructs the printer
respond with the current eSSID.
Syntax ! U1 getvar “wlan.current_essid”
Result “ZebraNet”
Note: This parameter is not supported in units using a Frequency Hopping
Spread Spectrum (FHSS) radio. The “wlan.essid” parameter can be used in-
stead.
To Next Page
Loading...