6
About This Document
Introduction
This guide provides information about the Cloud Connect for RFID feature in the FX Series readers. It
explains the system’s overall architecture, deployment modes, and configuration of different deployment
modes.
IMPORTANT: If you have a problem with your equipment, contact Zebra Global Customer Support for
your region. Contact information is available at: zebra.com/support
.
Supported Readers
• FX7500
• FX9600
Chapter Descriptions
Topics covered in this guide are as follows:
• Overview provides a summary on Cloud Connect
™ for RFID, the cloud-based management, control,
and RFID tag data collection for the FX Series RFID readers.
• Deployment Modes provides information on the three different modes of deployment.
• Operation Modes provides information on configuring the radio to different modes of operation.
• Setting Up Cloud Connect for RFID provides information on setting up Cloud Connect for RFID.
• Appendix provides the default Cloud Connect for RFID configuration.
Notational Conventions
The following conventions are used in this document:
•Bold text is used to highlight the following:
• Dialog box, window and screen names
• Drop-down list and list box names
• Check box and radio button names
• Icons on a screen
To Next Page
Loading...
