Zebra GC420d User Manual

iv
P1052685-001 GC420d™ User Guide 5/23/2012
FCC Compliance Statement
This device complies with Part 15 rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for Class B Digital
Devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a residential
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the product manuals, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, the user is encouraged to do one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced RF service technician for help.
The user is cautioned that any changes or modifications not expressly approved by Zebra
Technologies could void the user’s authority to operate the equipment. To ensure compliance,
this printer must be used with fully shielded communication cables.
Environmental Management
Do not dispose of this product in unsorted municipal waste. This product is recyclable, and
should be recycled according to your local standards.
For more information, please see our website at:
Web address: www.zebra.com/environment

Zebra GC420d Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Maximum printing width	104 mm
Ribbon width	110 mm
Core diameter	38 mm
Media thickness	0.08 - 0.18 mm
Maximum print size	104 x 991 mm
Maximum media length	991 mm
Maximum roll diameter	127 mm
Media thickness (imperial)	0.003 - 0.007 \
Maximum media length (imperial)	39 \
Supported paper width (imperial)	4.09 \
Ethernet LAN	No
RS-232 interface	Yes
USB 1.1 ports quantity	1
Connectivity technology	Wired
Certification	CE, FCC
Internal memory	8 MB
Built-in barcodes	CODABAR (NW-7), Code 128 (A/B/C), Code 39, Code 49, Code 93, EAN13, EAN8, Industrial 2/5, Interleaved 2/5, MaxiCode, PDF417, POSTNET, QR Code, UPC-A, UPC-E
Built-in processor	32-bit RISC
Page description languages	EPL2, ZPL, ZPL II
Dimensions (WxDxH)	201 x 208 x 170 mm
Power requirements	100-240V, 50-60Hz
AC adapter output current	2.5 A
AC adapter output voltage	20 V
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	40 - 105 °F
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Product color	White

Weight and Dimensions

Depth	208 mm
Width	201 mm
Height	170 mm
Weight	1400 g