77
Troubleshooting
Troubleshooting Tests
8/4/10 GK420t™ User Guide 980610-001 Rev. C
Troubleshooting Tests
Printing a Configuration Label
To print out a listing of the printer’s current configuration, refer to the one-flash sequence in
Feed Button Modes on page 80 in this section. See Appendix: ZPL Configuration on page 93
to interpret the label.
Recalibration
Recalibrate the printer if it starts to display unusual symptoms, such as skipping labels. Refer
to the two-flash sequence in Feed Button Modes on page 80 in this section.
To Next Page
Loading...
