89
Troubleshooting Tests
9/30/2014 GT800™ Thermal Transfer Printer User Guide P1032729-003Rev. A
Troubleshooting Tests
Printing a Configuration Report
To print out a listing of the printer’s current configuration, refer to the one-flash sequence
in Feed Button Modes on page 92 in this section. See Appendix: ZPL Configuration
on page 103 to interpret the label.
Recalibration
Recalibrate the printer if it starts to display unusual symptoms, such as skipping labels.
Refer to the two-flash sequence in Feed Button Modes on page 92 in this section.
To Next Page
Loading...