Zebra GT800 - Page 77

65
ZebraNet® 10/100 Internal (Wired) Print Server Option
9/30/2014 GT800™ Thermal Transfer Printer User Guide P1032729-003Rev. A
Printer Network Configuration Status Label
GT-Series™ printers with the ZebraNet
®
10/100 Internal Print Server option on-board
print an additional printer configuration status label for information needed to establish
and trouble shoot network printing. The following printout is printed with the ZPL
~WL
command.
The regular printout of the configuration status label has some of the printer’s network
settings such as IP Address, on the lower half of the printout.
The printer’s IP address is needed to identify and configure the printer for operations on
your network. See the ZebraNet
®
10/100 Internal Print Server manual for more
information.