9
Introduction
What’s in the Box?
8/4/10 GX420d™ / GX430d™ User Guide 980611-001 Rev. C
Operator Controls
Power Switch
Press up to turn ON or down to turn OFF the printer.
Feed Button
• Tap the Feed button once to force the printer to feed one blank label.
• Press the Feed button to take the printer out of a “pause” condition. The printer is put into
“pause” by either a programming command or an error condition. See What the Status
Light is Telling You on page 86 in the Troubleshooting chapter.
• Use the Feed button for printer setup and status (see Feed Button Modes on page 96 in the
Troubleshooting chapter).
Scroll Button (Wireless Printers Only)
Press the Scroll button to step through the menu, displayed printer parameters or settings.
Select Button (Wireless Printers Only)
Press the Select button to choose a menu branch or select a printer setting.
Caution •
The printer power should be turned off before connecting or disconnecting the
communications and power cables.
Power OFF
Power ON
Power Switch
Power Switch
To Next Page
Loading...
Need help?
General
