17
Getting Started
Loading Roll Media
8/4/10 GX420d™ / GX430d™ User Guide 980611-001 Rev. C
3.
If your printer includes the moveable blackline sensor option, verify that the sensor is
aligned in the center default position. This is the standard operating position for media
sensing. When the sensor is moved from the default label web (gap) sensing area, the
printer will only detect blackline, black mark and die-cut notched media. See Moveable
Blackline Sensor Option on page 49 for more details on adjusting this sensor option.
Printer Optional:
Moveable
Blackline Sensor
Off Center
Blackline Sensing Only
Default - Gap (Web) Sensing
Standard Operating Position
To Next Page
Loading...