Printer Options
Label Dispenser Option
48
980611-001 Rev. C GX420d™ / GX430d™ User Guide 8/4/10
4.
Close the dispenser door.
5.
Press the Feed button to advance the media.
6.
During the print job, the printer will peel off the backing and present a single label. Take
the label from the printer to allow the printer to print the next label. Note: If you did not
activate the label taken sensor to detect the removal of the dispensed (peeled) label with
software commands, the printer will stack and eject peeled labels.
To Next Page
Loading...