Printer Overview
Printer Information
14
P1028247-001 Rev. B KR203 Hardware Integrator Guide 10/26/2010
Printer Information
Auto Selected Print Widths
Printer control
Printer Control Panel - Allows very basic printer
configuration setup that includes a test page.
Print method Direct thermal page printing using thermal sensitive media.
Resolution 8 dots/mm (203 dpi)
Print speed
152 mm/s (6.0 inches/sec.) — Default
127 mm/sec.(5 inches/sec.)
101.6 mm/sec. (4 inches/sec.)
76.2 mm/sec. (3 inches/sec.)
Note: Printer media is rated for specific speed ranges and
some media types and materials will print better at slower
speeds.
Present speed
300 mm/s (11.81 inches/sec)
The KR203 uses the Looping Presenter modes.
In pass-through presenter mode (loop size set to zero)
presenter speed matches the print speed.
Print duty cycle Up to 33%
Media Sensors
Out of paper, paper in presenter, black mark, and an
optional external paper-low sensor.
Maximum print width 80 mm = 640 pixels
58 and 60 mm guide 60 mm = 480 pixels maximum
80 and 82.5 mm guide 80 mm = 640 pixels maximum
To Next Page
Loading...
