Zebra QLn420 Installation Instructions

pg. 4 P1059402-001 Rev. A
Notication of Canadian Requirements
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conformé å la norme NMB-003 du Canada.
Product Safety Regulatory Marking
Regulatory labels indicate compliance with safety standards. This product carries one or
more of the following labels: UL, CE, TUV and/or CS.
Introduction
NOTE: Zebra Technologies Corporation is not liable for personal injury or damage to any equipment
caused by the improper installation of this equipment to any power source.
Caution: All of these systems must be connected in strict accordance with the instructions in this
document. Failure to install this equipment per these instructions will void the warranty.
The following instructions for the QLn420 Mobile Battery Eliminator Kits include the
equipment listed below:
• P1058933: ASSY Battery Eliminator QLn420
• P1058934: DC to DC Power Adapter, 7.8V, 5A Output
• P1058935: ASSY DC Transfer Pack
• P1050667-032: KIT ACC_Handi-Mount (compact, flexible RAM arm) with Base Plate
QLn420
• P1050667-033: KIT ACC_QL420 Handi-Mount (compact, flexible RAM arm) without Base
Plate
• P1050667-035: KIT ACC QLn4 Mobile Mount for Forklifts (with U-arm bracket and fanfold
bin)
• AT17147-1: RAM MOUNT RAM-101
QLn420 Mobile Battery Eliminator Kits

Zebra QLn420 Specifications

Operating Environment

operating temperature	-4°F/-20°C to 122°F/50°C
storage/transport temperature	-13°F/-25°C to 158°F/65°C
operating humidity	10% to 90% non-condensing
storage humidity	10% to 90% non-condensing
ip rating	IP43 (IP54 with soft case)
drop tolerance	6'/1829mm to concrete

Power and Battery

battery capacity	5.0Ahr
battery charger	Built-in
charging options	AC adapter, Charging and Ethernet cradle, Vehicle cradle (DC power), Smart charger, Quad charger

Media Specifications

media width	2.0"(51mm)/4.4" (112mm)
media length	0.5"/12.7mm to 32"/813mm or continuous
maximum media roll size	2.6"/66mm OD on a 0.75"/19mm or 1.375"/34.9mm core
media thickness	3.2 mil to 7.5 mil
media types	Die-cut, roll-fed, fan-fold, receipt, linerless

Printer Specifications

resolution	203dpi/8 dots per mm
memory	128MB RAM; 256MB flash (standard)
print width	4.1"/104 mm
print length	Min. 0.5"/12.7mm Max. 32"/813mm
print speed	Up to 4"/102mm per second

Weight and Dimensions

width	6.5" (165mm)
height	7.35" (187mm) with beltclip
depth	3.25" (82.5mm)
weight	2.45lbs (1.1kg) with battery