Need help?Do you have a question about the Zebra QLn220 and is the answer not in the manual?
General| Maximum resolution | 203 DPI |
|---|---|
| Display | LCD |
| Product color | Black, White |
| RS-232 interface | Yes |
| Standard interfaces | Serial, USB 2.0, Ethernet |
| Optional connectivity | Ethernet |
| USB 2.0 ports quantity | 1 |
| Connectivity technology | Wired & Wireless |
| Flash memory | 256 MB |
| Certification | FCC 15, B, EN55022 B, EN60950, EN55024, VCCI B, EN55024, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, CE, UL, TUV, CSAMedia |
| Internal memory | 128 MB |
| Built-in barcodes | 1D, 2D, CODABAR (NW-7), EAN128, EAN13, EAN8, Interleaved 2/5, Matrix 2/5, PDF417, POSTNET, UPC-A, UPC-E |
| Processor frequency | 400 MHz |
| Storage temperature (T-T) | -25 - 65 °C |
| Operating temperature (T-T) | -4 - 122 °F |
| Operating relative humidity (H-H) | 10 - 90 % |
| Media thickness | 0.0584 - 0.1397 mm |
| Maximum media length | 813 mm |
| Maximum roll diameter | 55.9 mm |
| Maximum media length (imperial) | 32 \ |
Weight and Dimensions| Depth | 173 mm |
|---|---|
| Width | 117 mm |
| Height | 84 mm |
Outlines ownership and usage restrictions for manual content.
States Zebra's responsibility for errors and limitations.
Details intellectual property rights for software and manual.
Lists the Link-OS printer models this guide applies to.
Lists the hardware required for the setup process.
Lists essential software and information for configuration.
Choose between Wired, Wireless, or Bluetooth connectivity.
Choose the radio frequency (e.g., 2.4GHz, 5GHz) and band.
Select the country and optionally specify wireless channels.
Enter ESSID, select security mode, username, and password.
Upload certificates and enter private key passphrase if required.
Configure ESSID and select security mode for password-based authentication.
Send or save the generated configuration commands to the printer.
Choose Bluetooth as the connection type in the wizard.
Set Bluetooth name, discoverability, and authentication.
Configure adaptive frequency hopping and security modes.
Set security mode based on Bluetooth version for pairing.
Open communication and use a getvar command to check status.
Use 'Open Printer Tools' to send a setvar command to disable power save.
Use 'Direct Communications' to send a setvar command to disable power save.
To Next Page
