Zebra QLn420 - Accessory Cases; Soft and Hard Cases

16
Introduction
Battery Install &
Charging
Media Loading
Connect Printer/
Printer Controls
Cleaning and
Troubleshooting
Accessories and
Contact Info
QLn Series Mobile Printers Quick Start Guide
Accessories (cont.)
Soft Case
All QLn Series printers have soft case
options that also allow you to carry the
printer from your belt. (The QLn420
soft case is shown in the accompanying
graphic.)
1
2
3
Hard Case
The QLn420 printer has a
hard case option that also
allows you to carry the
printer from your belt with a
metal belt clip. The belt clip
is mounted to the hard case
and printer with two screws.
If no belt clip is used, two
shorter screws are used to
hold the printer to the hard
case.
Pivot top half of Exo-skele-
ton to open position.
Insert the QLn420 printer into
the lower half of the Exo-skel-
eton. Close the top half and
snap shut to secure.
Note: The QLn220 & 320 soft case is not
compatible with printers equipped with
the extended capacity battery option.