Zebra TLP 2844-Z User Manual

Troubleshooting Tests
Printing a Configuration Label
To print out a listing of the printer’s current configuration, refer to the
one-flash sequence in “Feed Button Modes” on page 45.
Recalibration
Recalibrate the printer if it starts to display
unusual symptoms, such as skipping
labels. See “Auto Calibration” on page
13.
980410-001 Rev. B 43

Zebra TLP 2844-Z Specifications

General

Resolution	203 dpi
Media Sensors	Reflective and transmissive
Print Method	Direct Thermal
Print Width	4.09 inches
Max Print Speed	4 inches per second
Max Print Length	39 inches
Connectivity	USB, Serial, Parallel
Media Handling	Roll-fed, Fanfold
Label Roll Capacity	5" (127 mm) O.D.
Supported Barcode Types	Code 39, Code 128, UPC, EAN, Interleaved 2 of 5
Supported Media Types	Roll-fed or fanfold, die-cut labels with or without black mark, tag stock, continuous receipt paper, wristbands
Media Width	1.0" (25.4 mm) to 4.25" (108 mm)
Media Thickness	0.003 inches (0.08 mm) to 0.0075 inches (0.19 mm)
Operating Temperature	40°F (5°C) to 105°F (41°C)
Storage Temperature	-40°F (-40°C) to 140°F (60°C)
Power Requirements	100-240 VAC, 50-60 Hz