Zeiss Primostar 3 - Page 4

 Table of Contents ZEISS
4.3.6 Installing the Analyzer Plate ..................................................................... 49
4.3.7 Installing the Primostar 3 HD IP Camera ................................................... 50
4.3.8 Installing a Camera to the Trinocular Tube ............................................... 52
4.3.9 Replacing Objectives ................................................................................ 53
4.3.10 Installing/Removing the Condenser .......................................................... 54
4.3.11 Installing/Removing the Mirror ................................................................. 55
4.3.12 Inserting an Eyepiece Pointer or an Eyepiece Micrometer ......................... 55
4.3.13 Folding Over the Eyecups......................................................................... 57
4.3.14 Changing the Eyecups.............................................................................. 57
4.4 Connecting the Microscope to the Power Supply.................................................. 58
4.4.1 Connecting the Microscope to the Mains Power Supply........................... 58
4.4.2 Connecting the Microscope to the Battery Supply Unit............................. 58
4.4.3 Connecting the Microscope to a Power Bank........................................... 59
4.5 Connecting the Primostar 3 HD IP Camera to a Storage Medium or Imaging De-
vice ...................................................................................................................... 60
4.5.1 Connecting a USB Flash Drive................................................................... 60
4.5.2 Connecting to the PC via USB 3.0 Port ..................................................... 60
4.5.3 Connecting to a Display (without PC) ....................................................... 61
4.5.4 Integrating the Primostar 3 HD IP Camera into a Network........................ 61
4.6 Installing Software for Use of the Primostar 3 HD IP Camera ................................ 64
4.6.1 Installing the Labscope Software on PC.................................................... 64
4.6.2 Installing the ZEISS ZEN lite Software on PC ............................................. 64
4.6.3 Installing the Labscope App on iPad......................................................... 64
5 First Operating Steps ............................................................................................ 65
5.1 Prerequisites for Commissioning and Operation.................................................... 65
5.2 Switching on the Microscope ............................................................................... 65
5.2.1 Microscope is directly connected to the Mains Power Supply ................... 65
5.2.2 Microscope is connected to the External DC Power Supply (12 V) ............ 66
5.2.3 Microscope is connected to a Power Bank ............................................... 67
5.3 Adjusting the Tube ............................................................................................... 67
5.3.1 Setting the Interpupillary Distance............................................................ 67
5.3.2 Setting the Viewing Height ...................................................................... 68
5.3.3 Setting the Eyepiece with Eyepiece Pointer or Eyepiece Micrometer ......... 68
5.4 Adjusting the Transmitted-Light Brightfield on the Full-Köhler Microscope ........... 69
5.5 Adjusting the Transmitted-Light Brightfield on the Fixed-Köhler Microscope......... 73
5.6 Adjusting the Transmitted-Light Phase Contrast or the Transmitted-Light Dark-
field using a Contrast Slider .................................................................................. 74
5.7 Adjusting the Transmitted-Light Phase Contrast or the Transmitted-Light Dark-
field using the Turret Condenser........................................................................... 78
5.8 Adjusting the Transmitted-Light Simple Polarization Contrast ............................... 80
5.9 Adjusting the Reflected-Light Fluorescence........................................................... 80
5.10 Capturing Images and Videos Using the Integrated Smart 8 MP Color Camera ..... 82
5.10.1 Basic Procedure Using Operator Panel...................................................... 82
5.10.2 Basic Procedure Using OSD menu ............................................................ 83
5.10.3 Image Capture with Labscope or ZEN Lite ................................................ 83
5.11 Switching off the Microscope ............................................................................... 84
6 Care and Maintenance.......................................................................................... 85
6.1 Safety during Maintenance................................................................................... 85
6.2 Maintenance Schedule ......................................................................................... 85
4 Instruction Manual ZEISS Primostar 3 | en-US | Rev. 1 | 415501-7011-111_en