62 Rev.C 63 Rev.C
AIR CONDITIONING (AC INFO)
If AC Info is enabled, changes induced by manual operations the air conditioning will be displayed by
the ZENEC system.
Function Icon Operation
Ventilation
On = Switch for ventilation is minimum adjusted to level 1
Off = Switch for ventilation is adjusted to level 0
Rear window
heating
Rear window heating switched on or off
Windshield
heating
Defrost function switched on or off
Air conditioning
Air conditioning switched on or off
Recirculating air
operation
Recirculating air operation switched on or off
Dual
Synchronous the temperature settings for driver and passenger
side
Auto
Automatic adjustment of temperature
DYNAMIC INDICATION OF SEAT HEAT
NOTE
All functions related to the air conditioning are only status indications. It’s not possible to operate
the air conditioning with the ZENEC system.
The effective range of functions is depending on the vehicle manufacturer, vehicle type and
vehicle configuration. The ZENEC system supports all listed functions above. Differences from
this information, features or functions cannot be used for claims.
Seat heater
Indication of current seat heating level.
In addition to the digit, the seat heating level will be indicated in
three different colour gradations.
Setting
The seat heating level will be displayed in combination with a
digit.
Function Icon Operation
Temperature
arrows
Indication of actual air flow:
Frontwindow – Center – Leg room
Temperature
Blue ca. LOW – 20.0 C
Yellow ca. 20.0 – 24.0 C
Red ca. 24.0 – HIGH
Ventilator setting
The digit shows the fan level.
To Next Page
Loading...
