EasyManua.ls Logo

ZENEC Z-E2014M - User Manual

ZENEC Z-E2014M
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
USER MANUAL
ENGLISH/ GERMAN
DEVICE USER MANUAL
Z
-
E 2 014 M
CAR SPECIFIC NAVICEIVER FOR
VW VEHICLES

Other manuals for ZENEC Z-E2014M

Questions and Answers

  • C
    Carrie HodgesAug 11, 2025
    Why is there no sound coming from my ZENEC Z-E2014M Car Video System?
    • E
      Edward HendersonAug 11, 2025
      There could be several reasons for no or low audio output from your ZENEC Car Video System. First, check if the mute function is activated and turn it off. Make sure the volume isn't set too low and increase it. Inspect the wiring for improper audio output connections and correct them if needed. Also, verify the balance and fader adjustments to ensure sound is distributed correctly. Damaged speakers or speaker wiring in contact with metal parts of the car can also cause this issue. Insulate all speaker wiring connections or replace the speaker cable. If the speakers are damaged, replace them.
  • O
    oguzmanAug 17, 2025
    How to fix a ZENEC Z-E2014M that won't turn on?
    • L
      Lori EricksonAug 17, 2025
      If your ZENEC Car Video System won't power on, start by checking the radio and car battery fuses. If either is blown, install a new fuse with the correct rating. If the unit experienced an illegal operation, press the RESET button.
  • B
    brian24Aug 26, 2025
    What to do if my ZENEC Car Video System has poor sound quality?
    • B
      bmejiaAug 27, 2025
      If your ZENEC Car Video System has poor sound quality or distortion, it could be due to a speaker power rating that is not compatible with the unit; connect proper speakers. Another cause could be a shorted speaker, so check the speaker connections.
  • C
    Courtney MerrittSep 1, 2025
    Why is there no image on my ZENEC Z-E2014M Car Video System?
    • L
      lisatrevinoSep 1, 2025
      If there is no image on your ZENEC Car Video System, ensure that the parking brake is engaged. Stop the vehicle in a safe place and apply the parking brake. Also, check if the "Monitor off"-function is activated and touch the monitor to activate the display.

Summary

SAFETY INSTRUCTIONS

FRONT PANEL BUTTONS

Front Panel Button Details

Detailed explanation of the function of each front panel button.

BASIC OPERATION OF MAIN DEVICE

Select a Source

How to access the main menu and select different sources.

RADIO OPERATION

OPERATION OF USB SOURCE

USB Playback Page

Details of the playback screen for USB media.

USB Playlist Page

Explains the playlist interface for USB sources.

OPERATION OF IPOD;IPHONE SOURCE

SMART DIAL OPERATION

BASIC BLUETOOTH HANDS-FREE OPERATION

Bluetooth Mobile Phone Pairing

Step-by-step guide to pairing a mobile phone with the device.

Bluetooth Pairing Process

Details on the pairing process, including SMART and PIN modes.

OPERATION OF A2 DP STREAMING SOURCE

BASIC OPERATION OF NAVIGATION

Inputting Destination and Starting Guidance

Steps to set a destination and begin navigation.

MAIN DEVICE SYSTEM SETUP

Export System Settings

How to export device settings to a USB drive.

Import System Settings

How to import device settings from a USB drive.

MAIN DEVICE SYSTEM SETUP: AUDIO

MAIN DEVICE SYSTEM SETUP: MISC

TROUBLESHOOTING

Troubleshooting: General Issues

Solutions for general problems like unit not powering on.

Troubleshooting: Audio Output Issues

Solutions for problems with no or low audio output.

Troubleshooting: TFT Monitor Issues

Solutions for issues related to the TFT monitor, like no image.

SPECIFICATIONS

WARRANTY INFORMATION

Warranty Limitations

Conditions not covered by the product warranty.

ZENEC Z-E2014M Specifications

General IconGeneral
Resolution800 x 480 pixels
TouchscreenYes
BluetoothYes
Video PlaybackYes
Audio PlaybackYes
Rear View Camera InputYes
DVD PlayerYes
Display Size6.2 inches
Operating SystemWindows CE
SD Card Reader/SlotYes
Steering Wheel Control CompatibilityYes

Related product manuals