ZENEC Z-E2014M - Ec Declaration of Conformity

62 63
Z
-
E 2 014 M
NOTESEC DECLARATION OF CONFORMITY
Page 1 of 1 06.12.2012 RevA
EC DECLARATION OF CONFORMITY
Hereby declares under our sole responsibility that the products:
Description of object: In-Car Navigation Device
Name of object: ZENEC E>GO (C9SL-Single-Tuner)
Type name of objects: Z-E2014M, Z-E3114M, Z-E3514M, Z-E3215, Z-E3824M, Z-E5014M, Z-E5114M, Z-E5314M,
Z-E5514M and identical/similar devices based on C9SL hardware platform
are conform to the essential requirements of the:
European Vehicle EMC Di
rective 72/245/EEC, including all modifications up to 2009/19/EC dated 12.03.2009 including proof
for
complience with following standards: CISPR25 (2
nd
edition 2002)
ISO 11452-2 (2
nd
edition 2004)
Radio and Telecommunications Terminal equipment Directive, R&TTE 1999/5/EC
The following harmonized European Standards have been applied:
ECE R10-04 Type approval of an electrical / electronic sub-assembly und
er
Regulation Nr. 10
EN 55022:2006 Class B Information Technology equipment - Emission Limits and Methods
EN 55024:1998 + A1:2001 + A2:2003 Information Technology equipment Immunity Limits and Methods
EN 61000-3-2:2006 Class D Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions
(equipment input current ≤ 16 A per phase)
EN 61000-3-3:1995 + A1:2001 + A2:2005 Electromagnetic
compatibility
(EMC) - Part 3: Limits - Section 3: Limitation of voltage
fluctuations and flicker in low-voltage supply systems for equipment with rated current
<= 16 A
EN 301 489 EMC and Radio Spectrum Matters (ERM)
Part 1 V1.5.1 Common Technical Requirements
Part 17 V1.2.1 Specific Conditions for 2,4 GHz Wideband Transmission Systems and 5GHz
high Performance RLAN equipment
ISO 7637-2:2004
Road vehicles - Electrical disturbances fr
om conduction and coupling - Part 2: Electrical
transient conduction along supply lines only
EN 60950-1:2006 Information technology equipment – Safety – Part 1: General requirements
(IEC 60950-1:2005, modified)
2002/96/EC Restriction of the use of certain hazardous substances in electrical and electronic
equipment (RoHS), Product is in accordance with the Eu
ropean WEEE Directive,
2
002/95/EC (2008/385/EC) RoHS Directive and the German ElektroG.
2011/6 5/EC RoHS2 Directive, revised and extended by Annex II.
Declared by:
Andre Grossenbacher, Chief Technology Officer
Bad Zurzach
(Place) (Date) (Signature)
Roland Braendli, Managing Director
Bad Zurzach
(Place) (Date) (Signature)
ZENEC by
ACR Braendli + Voegeli AG
Bohrturmweg 1
5330 Bad Zurzach
Switzerland
EU Legal Representative:
ACR S & V GmbH, Industriestrasse 35, D-79787 Lauchringen, Germany
Z-E2014M, Z-E3114M, Z-E3514M, Z-E3215, Z-E3824M
Z-E5014M, Z-E5114M, Z-E5314M, Z-E5514M