ZENEC ZE-MC296 - Page 5

5
ZE-MC296
1. INTERNAL MICROPHONE
2. POWER/MUTE
Press to switch device ON.
Press and hold to switch device OFF.
Short press to mute/unmute.
3. IR RECEIVER
4. UPDATE SLOT
Separate Micro-SD slot (for software updates only).
5. USB AND SD-CARD SLOT, RESET
Open the hatch to access the two slots and the RESET button.
Press to initiate a hardware reset.
6. BLUETOOTH
Short press to open Bluetooth mode.
Press and hold to adjust the TFT-screen brightness.
7. VOLUME/EQUALIZER
Rotate to increase/decrease volume.
Press to open Equalizer page.
8. HOME
Press to open main menu.
FRONT PANEL BUTTONS
FRONT PANEL BUTTONS