Zenith H27H49S - Page 48

Menu Function Value Default Brief Description of Function and Comments
Item Range Value
025. FUNCTION PRE 0 - 3 0 Controls channel preview in Pay-Per-View function menu.
026. NOT USED
027. NOT USED
028. CH OVER RIDE 0 / 1 1 Set to 0, to lock Auto Program and limit direct
channel access to only channels found in scan.
029. OLD OCV 0 / 1 0 OCV should set to 1.
030. ACK MASK 0 / 1 0 M.P.I. communication parameter.
031. POLL RATE 20 - 169 94 M.P.I. communication parameter.
032. TIMING PULSE 186 - 227 207 M.P.I. communication parameter.
033. NOT USED
034. CAMPORT EN. 0 / 1 1 Set to 1 to enable Camport front Video/Audio inputs.
035. NOT USED
036. NOT USED
037. REAR Y/C EN. 0 / 1 1 Set to 1 to enable the rear S-Video input.
038. NOT USED
039. NOT USED
040. AUTO CAMPORT 0 / 1 1 Set to 0 to add ‘Camport’ to Source menu.
041. AUTO COMPPORT 0 / 1 1 Set to 0 to add ‘Front Computer SVGA’ to Source menu.
042. NOT USED
043. NOT USED
044. NOT USED
045. NOT USED
046. STRT AUX SRCE 0-1-2-3 255 Selects the starting AUX source at power up.
4-6-255 (If 004 Start Channel is set to 0.)
047. AUX STATUS 0 / 1 0 Set to 1 for M.P.I. AUX source reported as Channel
number instead of Channel 0.
048. DIS. SETUP M. 0 / 1 0 Set to 1 to disable Setup menu.
049. DIS. AUDIO M. 0 / 1 0 Set to 1 to disable Audio menu.
050. DIS. VIDEO M. 0 / 1 0 Set to 1 to disable Video menu.
051. DIS. VCHIP M. 0 / 1 0 Set to 1 to disable V-Chip (Parental Control) menu.
052. DIS. SOURCE M 0 / 1 0 Set to 1 to disable Source menu.
053. DIS. CH-TIME 0 / 1 0 Set to 1 to disable Channel-Time on-screen display.
054. EN. SET. COL. 0 / 1 0 Set to 1 to enable custom color for the Setup menu.
055. FOR. SETUP M. 0 - 7 6 Custom foreground color for the Setup menu.
056. BCK. SETUP M. 0 - 7 4 Custom background color for the Setup menu.
057. EN. AUD. COL. 0 / 1 0 Set to 1 to enable custom color for the Audio menu.
058. FOR. AUDIO M. 0 - 7 1 Custom foreground color for the Audio menu.
059. BCK. AUDIO M. 0 - 7 7 Custom background color for the Audio menu.
060. EN. VID. COL. 0 / 1 0 Set to 1 to enable custom color for the Video menu.
061. FOR. VIDEO M. 0 - 7 4 Custom foreground color for the Video menu.
Page 48
Installer Menu
Installer Menu Items 25 through 61