EasyManuals Logo

Zephyr Cyclone AK6500CS User Manual

Zephyr Cyclone AK6500CS
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
28
Typhoon, Hurricane, & Cyclone Use, Care, and Installation Guide
TYPHOON, HURRICANE
& CYCLONE
UNDERCABINET
CORE
ACT™ Conversion
ůĬĻĭ
Some local codes limit the maximum amount of CFM a range hood can move. ACT™ allows you
to control the maximum blower CFM of select Zephyr Ventilation range hoods without the need for
expensive make up air kits. ACT™ enables the installer to easily set the maximum blower speed to
one of two most commonly specified CFM levels; 390 or 290 CFM. The usage of ACT™ may not be
necessary for your installation. Please check your local codes for CFM restrictions.
Hood must be disconnected from the main power prior to
performing the conversion instructions listed below. Failure to do
so could result in personal injury or damage to the product.
CAUTION
After re-positioning the jumper and powering on the hood, the
CFM cannot be changed again.
CAUTION

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zephyr Cyclone AK6500CS and is the answer not in the manual?

Zephyr Cyclone AK6500CS Specifications

General IconGeneral
Colorstainless steel
Hood Typeunder cabinet
Venting Typeducted, external
Temperature Sensorno
Number of Fan Speeds3
CFM600 cubic feet per minute
Sones5 sones
Control Typeslide
Delay Startno
Interior Lightyes
Remote Controlno
Voltage120 volts
Weight and Dimensions IconWeight and Dimensions
Depth22 1/4 inches
Height6 3/8 inches
Width29 3/4 inches
Net Weight30 pounds

Related product manuals