Zero DSR 2018

Controls and Components
3.15
Unit Display - Speed
To change the units that speed is shown in:
1. With the dash in its normal operating mode press and
hold the SEL button for 5 seconds.
2. Momentarily press the ADJ button to select English
(MPH) or metric (km/h).
3. Momentarily press the SEL button to return to normal
operating mode.
Unit Display - Temperature
To change the units that the temperature display is shown:
1. With the dash in its normal operating mode press and
hold the SEL button for 5 seconds.
2. Momentarily press the SEL button 4 times, the Temp
icon on the lower dash will start to flash.
3. Press the ADJ button to toggle between °F or °C on the
display.
4. Momentarily press the SEL button to return to normal
operating mode.
Zero Owner's Manual (S and DS).book Page 15 Wednesday, February 28, 2018 11:21 AM